Samsung ML 2010 Toner Refill Kit by Laser Tek Services. Also good in the ML-2510 Dell 1100 Toner ML2010D3
- Kit comes with 1 Bottle, Simple Instructions, Funnel Cap, Latex Gloves if needed; Toner Wipes- These cloths are chemically aerated to draw toner dust
- Each Bottle is beatific for at small the aforementioned tender consent as a newborn cartridge, commonly a taste more.
- Product is secure to be aforementioned calibre print, Bottle filler haw depart BUT gramme alluviation is ever the same.
- Fantastic sound hold with Laser Tek Services, not commonly needed, but if you requirement it we are there for you.
- Save bounteous apiece instance you fill and GO GREEN!!!
Product Description
Toner fashioned to be utilised with the mass Printers & Cartridges Samsung ML-2010 Samsung SCX-4321 Series Samsung SCX-4521 Series Samsung SP20MPP Samsung SP20MPU copier Phaser 3117 copier Phaser 3122 copier WorkCentre PE-220 XEROX DocuCentre PE-220 Samsung ML-1610 Samsung ML1610D3 Samsung ML2010D3 Dell 1100 Dell 310-6640 (GC502) Dell 1110 Samsung ML-2510 Samsung ML-2570 Samsung ML2571N Samsung ML2510 Samsung ML2570 Samsung ML-2571N Samsung ML-2010 Series(E)D1 Samsung … More >>
I opened this and tried to follow directions but when I tried to place the powder in the cartridge it just exploded all over. I was outside so it was simpler to clean up. I just threw everything away and bought a cartridge.
Rating: 2 / 5
This set came quickly with American English (not Chinese English) instructions in color that were very direct and simple to follow. Things to note: You will need both a regular/small Phillips screwdriver and fine flat screwdriver or small putty knife for prying the edge and cap off. I didn’t even need the latex gloves or rag they include, but just be careful and do it in a space that has excellent lighting and can potentially get a small dirty. They include a replacement fuse as well to make sure the printer doesn’t reject the refilled cartridge. They also do specify that cartridges should not be refilled more than three times, which makes sense I guess. Very worthwhile, economical, and simple. The bottle is also recyclable plastic #2.
Rating: 5 / 5
It appears that laser printer manufacturers have taken a page out of the inkjet business plot: selling cheap hardware but make out like bandits with the refills. In a research- intensive field such as ink this is somewhat understandable, but monochrome toner is such a mundane product and the Replacement Cartridge for Samsung ML-2010 runs higher than a new printer, so I veered elsewhere – and I’m glad I did.
Shipping was decent (LaserTek delivered from Fargo to New York in 4 business days via USPS), the instructions were simple enough (although a small amateurish, with photos instead of schematics), and the whole process over in 11 minutes (yes I clocked). I had a small toner left over at the end, in fact I spilled some on the table, but it wiped clean simple enough (Lysol and paper towel). The prints look flawless to me, and it doesn’t smudge either – perfect.
Best of all, by going with the refill, I produced less trash compared to a new cartridge, what more can one want: save money AND be simpler on the environment? Five stars.
Rating: 5 / 5
just follow the directions. I laid out some ancient newspapers on the work surface. The instructions say to dump out any of the older remaining toner. And there was at least a tablespoon so be prepared. Getting the cap off the cartridge is tough, somebody recommended using an ancient credit card. I used my fingernails and an ancient credit card. This seems to be the really critical part because if that cap gets hurt, you’re going to have toner leaking out. Otherwise, I’m printing again and didn’t have to pay the $80 for an OEM replacement part. Shipping was quick, arrived 3-6 days earlier than expected. The shipping charge is steep, so you get what you pay for.
Rating: 5 / 5
The instructions were simple to follow, although I’m not sure it says not to squeeze the bottle, don’t. I didn’t but someone might, just let gravity do the work. It took 5 minutes of just letting the powder drop in, remove the bottle several times to let the powder settle back to the bottom of the bottle. Just a small shaking does the job, even had a third of the powder left for later. I printed a 15 page document with perfect results.
Rating: 5 / 5